SPA PLUS成立于2007年，繼續成功交付并超越現代實驗室的要求?，F(xiàn)在可以在全球50多個國家/地區找到它，并且還在以驚人的速度增長。全球存在的原因是其經過驗證的可靠性和易用性，專為測試特殊蛋白質而設計。
SPA PLUS是一個全自動系統，可確保您的實驗室始終如一地提供高質量結果并實現令人印象深刻的通量。
SPA PLUS具有大型測定菜單，使您的實驗室可以在專用平臺上運行更多特殊蛋白質測定。這樣可以在其他分析儀上留出空間進行常規測試，從而進一步提高實驗室效率和生產率。
分析方法與Binding Site 的比濁SPA PLUS結合使用可提供高度靈敏，可重復和一致的結果。
對結果充滿信心
自動抗原過量檢查
通過無接觸的樣品/試劑空氣混合減少殘留
直觀的軟件和強大的硬件
優化運行Freelite和Hevylite
**的客戶支持
在高技能的技術和工程團隊的支持下
具有知識和實踐專長的敬業專業人員
使客戶滿意
提高生產率
1 ST結果在15分鐘內，隨后每30秒結果
板載試劑冷卻/監控
寬廣的測量范圍*大程度地減少了重新運行，確保了*佳的試劑用量和通量
可靠
平均無故障時間長達249天
快速啟動和關閉
停機時間*短，可確保實驗室服務的連續性
易于操作
即用型條形碼試劑
完全集成的雙向RS232接口功能
SPA PLUS提供了用于專業蛋白質測試的**菜單。此外，為了Freelite ®和Hevylite ®，我們提供的**狀況的評估全方位的**球蛋白，**球蛋白亞類及補體測定的。除此之外，對具有臨床意義的蛋白質的其他測定方法的范圍也不斷擴大。
我們所有的測定都是全自動的，易于使用，并且針對SPA PLUS進行了優化，以確保*佳性能。
關鍵檢測功能
提高結果的可信度–必要時，自動進行抗原過量檢查可提示輸入真正的抗原過量樣品
減少日常準備工作–具有長期穩定性的即用型試劑。
輕松訂購庫存–單個套件格式包括校準器和控件。
技術指標
通量
孵育10分鐘-**結果需要15分鐘-之后每30秒進行一次
試劑模塊
24個試劑位
板載試劑冷卻（10°C + 2°C）
雙試劑探針，在添加試劑之間自動清洗
試劑水平檢測和試劑管理
自動試劑轉換
采樣模塊
樣本類型：血清，血漿，尿液，腦脊液
每個轉盤40個樣本+ 5個STAT位置：30個帶條形碼讀取器的主/次管
接受樣品管：一次性杯，二級管，5mL，7mL，10mL上等管
集成的樣品條形碼讀取器。可接受的條形碼：Code 39，Code 128，ITF，NW-7。*多讀取18位數字。
*小樣品量150μL
自動樣品稀釋
自動重播
樣品水平檢測
內部/外部樣品探針自動清洗
反應模塊
60個半長久性丙烯酸試管
反應溫度37°C + 0.1°C
自動10步高溫比色皿清洗系統
雙室氣壓增強混合
光學模塊
波長：12離散
自動細胞空白監測
鹵素燈：2000小時，帶燈泡壽命監控器
硅光電二*管檢測器
軟件
視窗®為基礎的
兼容LIS（RS-232C雙向接口）
Levy-Jennings質量控制監控
供水，清洗液和廢液位警報
物理規格
尺寸：31.5英寸/ 800毫米（寬度）x 25.2英寸/ 640毫米（深度）x 20.5英寸/ 520毫米（高度）
重量：210磅/ 96公斤
電源要求：AC 100/115/230 V 50/60 Hz
額定功耗：600 VA
水類型：去離子水
3L酸和3L堿洗瓶
10升去離子水容器，10升廢物容器和5升備用廢物和水容器
維修保養服務
1年有限服務保修
*少的用戶維護
Established in 2007, the SPAPLUS continues to successfully deliver and exceed the demands of a modern laboratory. It can now be found in over 50 countries worldwide and still growing at a phenomenal rate. The reason for the global presence is its proven reliability and ease of use specifically designed for testing specialist proteins.
SPAPLUS is a fully automated system that ensures your laboratory will consistently deliver high quality results and achieve an impressive throughput.
SPAPLUS has a large assay menu that enables your laboratory to run more of your special protein assays on a dedicated platform. This creates space on other analyzers for routine testing to additionally increase your laboratory efficiency and productivity.
The combination of the assays and the turbidimetric SPAPLUS from Binding Site delivers highly sensitive, reproducible and consistent results.
Confidence in results
Automatic Antigen Excess Check
Minimal carry over through contact free Sample/Reagent air mixing
Intuitive software and robust hardware
Optimised to run Freelite and Hevylite
Exceptional Customer support
Supported by highly skilled technical and engineering team
Dedicated professionals with knowledge and practical expertise
Delivering customer satisfaction
Increase productivity
1st result in 15 min, subsequent results every 30 seconds
On-board reagent cooling/monitoring
Wide measuring range minimizes re-runs ensuring optimal reagent usage and throughput
Reliable
Mean time between failure of up to 249 days
Quick start up and shut down
Very low downtime ensuring continuity of laboratory service
Easy to operate
Ready-to-use barcoded reagents
Fully integrated bi-directional RS232 interface capability
Technical Specification
Throughput
10 minute assay incubation - 15 minutes to first result - every 30 seconds thereafter
Reagent Module
24 reagent positions
Onboard reagent cooling (10°C + 2°C)
Dual reagent probes with automated washing between reagent addition
Reagent level detection and reagent management
Automatic reagent changeover
Sampling Module
Sample Type: serum, plasma, urine, CSF
40 sample + 5 STAT positions per carousel: 30 primary/secondary tube with barcode reading
Sample tubes accepted: disposable cups, secondary tubes, 5mL, 7mL, 10mL primary tubes
Integrated sample barcode reader. Acceptable Bar Codes: Code 39, Code 128, ITF, NW-7. Reads up to 18 digits.
Minimum sample volume 150μL
Automatic sample dilution
Automatic rerun
Sample level detection
Automatic interior/exterior sample probe washing
Reaction Module
60 semi-permanent acrylic cuvettes
Reaction temperature 37°C + 0.1°C
Automatic 10-step, high temperature cuvette washing system
Dual-chamber, air pressure enhanced mixing
Optics Module
Wavelength: 12 discrete
Automatic cell blank monitoring
Halogen lamp: 2000 hours with lamp-life monitor
Silicon photo-diode detectors
Software
Windows®-based
LIS compatible (RS-232C bi-directional interface)
Levy-Jennings QC monitoring
Water supply, wash solutions and waste level alarms
Physical Specifications
Dimension: 31.5"/800mm (Width) x 25.2"/640mm (Depth) x 20.5"/520mm (Height)
Weight: 210 lbs / 96kgs
Power requirements: AC 100/115/230 V 50/60 Hz
Rated power consumption: 600 VA
Water type: Deionised Water
3L Acid and 3L Alkali wash bottles
10L DI water reservoir, 10L waste container and 5L back-up waste and water containers
Maintenance Service
1-year limited service warranty
Minimal user maintenance